How To Use Your Minox Dsc; Charging The Batteries - Minox DSC Notice D'utilisation

Ready display (flash)
10
Connector (contacts)
1 1
Engaging notches
1 2

How to use your MINOX DSC

Before using the DSC for the first time you have
to fully charge the integrated batteries.
Note: When charging for the first time the bat-
teries must be fully charged to ensure maximum
performance. Do not interrupt the charging proc-
ess before the green light goes out, indicating
that the charging process has finished.

Charging the batteries

Charging the battery in the camera (DSC)
Use the provided power supply cable (mini USB
to USB) to connect the DSC to the USB port of
your switched-on computer. Charging starts au-
tomatically.
To charge the battery of the DSC without the
computer you can use an optionally available AC
Adaptor (Order number see: Accessories).
A green LED lights up while the battery is charg-
ing. Charging is complete when the green light
goes out.
Charging the battery in the
flash module (DSC Flash)
Use the provided power supply cable (mini jack to
USB) to connect the flash to the USB port of your
switched-on computer. Charging commences au-
tomatically.
Mini USB port
33