Camera Maintenance - Minox DSC Notice D'utilisation

Adjusting the mains frequency
To reduce flicker in video mode when shooting in
artificial light (fluorescent lamps) you can manu-
ally adjust the frequency. To do this select the
frequency 50 Hz or 60 Hz and confirm your selec-
tion by pressing the shutter release.
Revert to default settings
If you want to reset your camera to the ex-works
settings, select Settings press the shutter release
to reset the settings.
Language selection
You can set the language used in the menus.
Select Language and press the shutter release.
Choose the language you wish and confirm your
selection by pressing the shutter release.
Setup
Format
AutoOff
Frequency
Settings
46
Setup
Language
Exit

Camera maintenance

Read the following information carefully to en-
sure correct use of your MINOX DSC.
Places to avoid
Do not store or use the camera in the following
environments:
• in very damp, soiled or dusty places.
• in places exposed to direct sun radiation or
extreme temperatures, such as inside a locked
car in the summertime.
• in extremely cold places.
• in places exposed to severe vibrations.
• in places exposed to smoke or steam.
• in places exposed to strong magnetic fields
(e.g. in the proximity of electrically operated
motors, transformers or magnets).