Combi Microwave Functions - ETNA CM350ZT Mode D'emploi

OPERATION

Combi microwave functions

Press the on/off key to activate the microwave function.
1.
'01:00' is blinking in the display and the microwave icon appears in the display.
▷
2. Turn the function knob two positions to the right.
▷ The hot air icon is blinking. Time, temperature, the microwave icon and the oven icon
are shown in the display.
3. Turn the selection knob to the right to choose a mode (see the oven functions table).
▷ If the symbols stops blinking, the chosen mode has been activated. You can go back
one step by turning the function knob one position to the left.
You can adjust the power, the time and/or the temperature in every mode.
▷
Press the power/weight key, the clock key or the temperature/automenu key.
4.
The power, time or temperature is blinking.
▷
By turning the selection knob you can set the desired power level (100, 300 or 500 W),
▷
time and/or temperature.
To confirm the setting, press the power/weight key, the clock key or the
▷
temperature/automenu key again.
The power, time and temperature that can be set depends on the mode that you have
chosen.
5. Press the start/pause key to start the cooking process.
When the cooking process is ready, you will hear 5 beeps. The fan continues to
▷
operate for some time and then stops automatically.
If you do not press the start/pause key, the combi microwave oven switches itself off
automatically after 15 minutes.
EN 19