ETNA CM350ZT Mode D'emploi page 105

OPERATION
Attention!
• During the automatic cooking programmes, the microwave function is switched on.
Therefore do not use metal utensils (see chapter 'Microwave use').
• Put the dish on the glass baking tray, and insert it in the oven on level 1. Press the start/
pause key.
1. Press the on/off key to activate the microwave function.
▷ '01:00' is blinking in the display and the microwave icon appears in the display.
Turn the function knob three positions (P01) or four positions (d01) to the right.
2.
Time, weight, the first number of the automatic programs and the defrost icon/
▷
automatic cooking program icon are shown in the display.
Turn the selection knob to the right to choose an automatic cooking program. If the
3.
symbols stops blinking, the chosen program has been activated. You can go back one step
by turning the function knob one position to the left.
Press the power/weight key to set the weight.
4.
The weight is blinking in the display.
▷
5. With the selection knob you set the right weight. Press the power/weight key again to
confirm the setting.
The weight that can be set depends on the program that you have chosen.
▷
6. Press the start/pause key to start the automatic cooking program.
When the cooking program is ready, you will hear 5 beeps. The fan continues to operate for some
time and then stops automatically.
If you do not press the start/pause key, the combi microwave oven switches itself off
automatically after 15 minutes.
EN 21