Combi Microwave Functions - ETNA cm644ti Mode D'emploi

OPERATION

Combi microwave functions

1. Press the combi function button to activate the combi-microwave
function.
The 'hot air' indicator flashes. Time and temperature appear in the
display and the microwave function and oven function icons are
visible.
2. Use the selection buttons to select a mode (see chapter 'Oven
functions table'). The selected mode is active when the symbol
stops flashing.
3. You can change the power, time and/or temperature of each mode
(if desired) (for the grill; setting 1, 2 or 3, with 3 being the highest
setting). For this, press the settings or clock button. The power,
time or temperature (setting) will flash. Use the selection buttons
to set the desired power, time and/or temperature/setting. Press the
settings or clock button again to confirm.
The power, time and temperature that can be set depends on
the mode that you have chosen.
4. Press the start button to start the cooking process.
When the cooking process is ready, you will hear 5 beeps. The fan
continues to operate for some time and then stops automatically.
If you do not press the start button, the combi microwave oven
switches itself off automatically after 15 minutes.
EN 15