Power Supply (Fig. E); Console (Fig F); Explanation Of Buttons; Operation - Tunturi E-80R Recumbent Bike Manuel De L'utilisateur

English
- Tighten the backrest adjustment knob.

Power supply (Fig. E)

The trainer is powered by an external power supply. Refer to the
illustration to locate the trainer power input.
‼ NOTE
• Connect the power supply with the trainer before connecting it to
the wall outlet.
• Always remove power cord when
• machine is not in use.

Console (fig F)

1. Display
2. Tablet/ book support
3. Buttons
⚠ CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered with drops of
sweat.
• Do not lean on the console.
• Only touch the display with the tip of your finger. Make sure that
your nails or sharp objects do not touch the display.
‼ NOTE
• The console switches to standby mode when the equipment is not
used for 4 minutes. If the console is in standby mode, the display
shows the room temperature

Explanation of buttons

BACK/ STOP
- Move back to previous window
- Stop the active training

QUICK START

- Start training without present settings.
All workout information will count up.
MAIN MENU
- It will go back to main menu.
- During training, sets console in "end your workout" mode.
USER SETTING
- Press this button to enter User/Setting mode screen
- This button is of no use during workout
MODE/ ENTER
Turn functions
- Choose workout mode in main menu
- User/setting mode option selection
- Choose working item on the setting screen
- Increase or decrease the setting value
- Adjusting target value (high/low) during workout
- Shift up or down during T-Ride™ or T-Road workout
Horizontal
- Turning clockwise to choose option rightward.
- Turning counter-clockwise for leftward
Vertical
- Turning clockwise to shift up.
- Turning counter-clockwise to shift down
Press functions:
- Sport mode confirmation
- Option confirmation under User/Setting mode
- Confirmation of working item on setting screen
- Setting value confirmation
- Screen switching between BPM-NM or BPM-W during workout
- Screen switching between BPM-M or BPM-FT during T-Ride™
- Screen switching between Video - Profile during T-Road
- Switching to next tutoring mode during T-Trainer™
External connections
USB port
Usb port can be used for:
- Service purposes such as software update.
‼ NOTE
• USB format should not be NTFS

Operation

Power on
- Press any key to power on the console when being in sleep mode..
After loading the application (fig. F-01) the user interface will be show
main menu screen (fig. F-02).
Trainer is now ready to start your workout programming or just select
quick start and begin.

Programs

Quick start
- Turn the jog wheel and select
"Quick start"
- Press the jog wheel to confirm and enter the workout screen quickly.
(fig. F-03)
The X axis denote time in minutes between 0~30. It is updated once
every 15 minutes during workout
2 2