Use; Power Supply (Fig. E) - Tunturi E50R Manuel De L'utilisateur

Masquer les pouces Voir aussi pour E50R:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
English
NOTE
Do not use the hand pulse sensors in
combination with a heart rate chest belt.
If you set a heart rate limit for your workout, an
alarm will sound when it is exceeded.
Heart rate measurement
(heart rate chest belt)
The most accurate heart rate measurement is achieved
with a heart rate chest belt. The heart rate is measured
by a heart rate receiver in combination with a heart rate
transmitter belt. Accurate heart measurement requires
that the electrodes on the transmitter belt are slight
moist and constantly touching the skin. If the electrodes
are too dry or too moist, the heart rate measurement
will become less accurate.
WARNING
If you have a pacemaker, consult a physician before
using a heartrate chest belt.
CAUTION
If there are several heart rate measurement
devices next to each other, make sure that the
distance between them is at least 1.5 metres.
If there is only one heart rate receiver and several
heart rate transmitters, make sure that only one
person with a transmitter is within transmission
range.
NOTE
Do not use a heart rate chest belt in combination
with the handpulse sensors.
Always wear the heart rate chest belt under your
clothes directly in contact with your skin. Do
not wear the heart rate chest belt above your
clothes. If you wear the heart rate chest belt
above your clothes, there will be no signal.
If you set a heart rate limit for your workout, an
alarm will sound when it is exceeded.
The transmitter transmits the heart rate to the
console up to a distance of 1 metre. If the
electrodes are not moist, the heart rate will not
appear on the display.
Some fibers in clothes (e.g. polyester, polyamide)
create static electricity which can prevent
accurate heart rate measurement.
Mobile phones, televisions and other electrical
appliances create an electromagnetic field which
can prevent accurate heart rate measurement.
Maximum heart rate
(during training)
The maximum heart rate is the highest heart rate a
person can safely achieve through exercise stress. The
following formula is used to calculate the average
maximum heart rate: 220 - AGE. The maximum heart
rate varies from person to person.
WARNING
Make sure that you do not exceed your
maximum heart rate during your workout. If you
belong to a risk group, consult a physician.
Beginner
50-60% of maximum heart rate
Suitable for beginners, weight-watchers, convalescents
and persons who have not exercised for a long time.
Exercise at least three times a week, 30 minutes at a
time.
Advanced
60-70% of maximum heart rate
Suitable for persons who want to improve and maintain
fitness. Exercise at least three times a week, 30 minutes
at a time.
Expert
70-80% of maximum heart rate
Suitable for the fittest of persons who are used to long-
endurance workouts.

Use

Adjusting the support feet
The equipment is equipped with 4 support feet. If
the equipment is not stable, the support feet can be
adjusted.
-
Turn the support feet as required to put the
equipment in a stable position.
-
Tighten the locknuts to lock the support feet.
Adjusting the horizontal seat position
The horizontal seat position can be adjusted by setting
the seat to the required position.
-
Loosen the seat adjustment knob.
-
Move the seat to the required position.
-
Tighten the seat adjustment knob.
Adjusting the backrest inclination
-
Loosen the backrest inclination adjustment knob.
-
Move the backrest to the required position.
-
Tighten the backrest inclination adjustment knob.

Power supply (Fig. E)

The trainer is powered by an external power supply.
Refer to the illustration to locate the trainer power
input.
2 0

Publicité

Table des Matières
loading

Table des Matières