Power Supply (Fig. E); Console (Fig F); Explanation Display Functions - Tunturi E50 Upright Bike Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
English

Power supply (Fig. E)

The trainer is powered by an external power supply.
Refer to the illustration to locate the trainer power
input.
NOTE
Connect the power supply with the trainer
before connecting it to the wall outlet.
Always remove power cord when
machine is not in use.

Console (fig F)

1
2
3
1. Display
2. Tablet/ book support
3. Buttons
CAUTION
Keep the console away from direct sunlight.
Dry the surface of the console when it is covered
with drops of sweat.
Do not lean on the console.
Only touch the display with the tip of your finger.
Make sure that your nails or sharp objects do not
touch the display.
NOTE
The console switches to standby mode when
the equipment is not used for 4 minutes. If the
console is in standby mode, the display shows
the room temperature

Explanation Display functions

Time
-
Without setting the target value, time will count up.
-
When setting the target value, time will count down
from your target time to 0 and alarm will sound or
flash.
-
Without any signal being transmitted into the
monitor for 4 seconds during workout, time will
STOP
-
Range 0:00~99:59
Speed
-
Displays current training speed.
Maximum speed is 99.9 KM/H or ML/H.
-
Without any signal being transmitted into the
monitor for 4 seconds during workout, SPEED will
display "0.0"
RPM
-
Displays the Rotation Per Minute.
Display range 0~15~999
-
Without any signal being transmitted into the
monitor for 4 seconds during workout, RPM will
display "0"
WATTS
-
Display current workout watts. Range 0 ~ 999
Distance
-
Without setting the target value, distance will count
up.
-
When setting the target value, distance will count
down from your target distance to 0 with an alarm
sound or flash.
-
Range 0.00~99.99
Calories
-
Without setting the target value, calorie will count
up.
-
When setting the target value, calories will count
down from your target calorie to 0 with an alarm
sound or flash.
-
Range 0~9999.
NOTE
This data is a rough guide for comparison of
different exercise sessions which cannot be used
in medical treatment
2 0

Publicité

Table des Matières
loading

Table des Matières