Precautions, Requirements And Recommendations - ENBIO S Mode D'emploi

This symbol is located on the device's rating plate and indi-
cates the serial number.
This symbol is located on the device's rating plate and indi-
cates compliance with EC guidelines.
This symbol is located on the device's rating plate and indi-
cates the device's date of production.
This symbol is located on the device's rating plate and indi-
cates the device's manufacturer.
This symbol is located in the user manual and indicates read-
ing the information provided in the user manual.
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND
OF THE COUNCIL of 4 July 2012 on waste electrical and elec-
tronic equipment (WEEE) , collection point registered with
the General Inspectorate of Environmental Protection; this
unit handles selective waste collection.

1.5 Precautions, requirements and recommendations

– The user is responsible for the installation, correct operation and main-
tenance of the device in accordance with instructions provided in this
user manual. If needed, contact the service or the supplier of the device.
– The steriliser is not intended for sterilising liquids, biomedical waste or
pharmaceutical products.
– The steriliser must not be used if explosive gases or vapours are present
in the air.
– After the cycle is completed, the load is hot. Remove tools or packs from
the chamber using appropriate thermal gloves or equipment that pre-
vents burns.
– Do not remove the rating plate or any other elements of labelling from
the device.
– Follow guidelines for preparing tools for sterilisation.
– Pouring water or other liquids on the device may cause a short-circuit.
– Prior to inspection, maintenance or servicing, turn off the device and dis-
connect it from the power grid.
– Servicing may only be performed by trained service personnel and using
original replacement parts.
Read this Operating Manual carefully before using this device. Install and
operate the device strictly as specified herein. Comply with all safety re-
quirements for the device. This will ensure proper and safe operation of this
device. Any other application, inconsistent with this manual, may lead to
dangerous accidents. Restrict unauthorised personnel access to the device
and train the personnel handling the device. An operator of this device is
any person who, by training, experience and knowledge of applicable ref-
erence standards, manuals and occupational health and safety regulations
has been authorised for the essential operation with the device and who
is capable of identifying and avoiding the hazards related to operation of
this product.
Always append this Operating Manual with the device if transferred to a
new owner. The Operating Manual contains detailed information about
assembly, installation, commissioning, use, repairs and maintenance of
the device. If the device is used as intended, this Manual will provide suf-
ficient guidance to qualified personnel. Keep this Operating Manual close
to the device and easily accessible at all times. As required by continuous
improvement of the product, the manufacturer has the right to amend this
Manual or make changes to the device without prior notice. Enbio
Group AG shall not be liable for damage incurred during the wait for war-
34