ENBIO S Mode D'emploi page 40

PROGRAM 134 C 134
o
ENBIO S FAST
Type of load Un- Packaged
packed
instru- non-pack-
ments aged tools
Process tem- 134°C
perature
Pre-vacuum 1
number
Sterilisation 3,5 min
duration
Drying -
duration 4 min
Total 100g: 7 min
100g:
process
10min
duration
ENBIO PRO
18 min
Class S
*Ambient temperature can affect the process extension.
*The duration of the first process may be longer due to the need for the device to heat up
**PRION program is available only in ENBIO PRO.
The 134°C program is recommended for the majority of sterilised mate-
rials due to the short duration of the entire program. The 121
be used to sterilise all other materials that cannot be subjected to steri-
lisation at the temperature of 134
of 500 g for ENBIO S and 800 g for ENBIO PRO.
39
C 121 C PRION**
o o
Packaged Packaged
and and and
non-pack- non-pack-
aged tools aged tools
134°C 121°C 134°C
3 3 3
4 min 15 min 18 min
3 min 5 min 5 min
5 min
ENBIO ENBIO
PRO PRO
100g: 100g: 800g: 43 min
13 min 26 min
200g: 200g
31 min
ENBIO ENBIO
PRO PRO
B B B
C should
o
C. Do not exceed a maximum weight
o
When the device is turned on and
the display shows the start screen,
press the screen to go to the device
menu. From here you can execute
the Program, go to the Test, Infor-
mation menu, and the COUNTERS
menu.
Temperature programs with 121°C, 134°C and 134°C PRION for unpacked
and packaged loads and the 134°C FAST program for unpacked loads can
be selected via the program menu.
When the chamber is opened, the
If the USB drive has not been inserted in the device, the USB symbol is not
displayed in the bottom right corner
of the screen, and a message about the missing USB drive is displayed.
The program data will not be saved. You can continue working without
saving the data on the USB drive by
pressing the field or stop working by selecting the
to insert the drive in the port and start the program from the beginning.
If you decide to continue working or the
selected, the screen will display a chart of pressure during the entire pro-
cess, with the current stage of the program indicated, while information on
symbol blinks. When the
chamber is locked by turning the lock
knob clockwise, the display will show
the symbol, indicating
the chamber has been closed correctly.
Now you can select the program by
pressing the symbol of the tempera-
ture you want to perform the
sterilisation in or
The selected program is initiated by
pressing the corresponding symbol
.
, field
. field has been
.