Test Programs - ENBIO S Mode D'emploi

material biocompatibility. All components of the device that are in di-
rect contact with the sterilised load have no toxic, sensitising or irritat-
ing effects.
From here you can select the vacuum leak test program and the Helix/B&D
test program. Select the appropriate program by pressing the relevant field
on the display.
When the process chamber is closed, the
changes to and by pressing this field you launch the se-
lected test program.
If the USB drive has not been inserted in the device, the USB symbol is not
displayed in the bottom right corner of the screen, and a message about
the missing USB drive is displayed.
41

5.3 Test programs

By pressing the field, you
can go to the test program menu.
The message blinks
on the display.
information
The test program data will not be saved.
You can continue working without saving
the data on the USB drive by pressing the
field or stop working by selecting
the field to insert the drive in the
port and start the test program from the
beginning.
Program ENBIO S / ENBIO PRO
Process temperature
Pre-vacuum number
Sterilisation duration
Drying duration
Total process duration
Vacuum leak test
The vacuum leak test may only be performed on a cold device, before work
is commenced. The vacuum leak test enables testing the autoclave for the
presence of leaks. The following are checked during the test:
• Vacuum pump performance.
• Pneumatic system sealing.
When the vacuum leak test program is selected and launched with the
button, the vacuum leak test progress screen is displayed.
Bowie & Dick Vacuum leak
/ Helix test
134°C –
3 1
4 min –
3 min –
15 min 16 min
Information on pressure loss in the
process chamber, and the test dura-
tion are displayed.
When the test program is completed,
the following screens are displayed
alternately.