Dispensing With The Autosteam Selector - Faema PRESTIGE Utilisation Et Installation

15.1 Dispensing with the Autosteam selector (2a) (where applicable)
Scalding hazard!
insulating devices (A) to move the water and
steam nozzles.
General indications
at a storage temperature no higher than 41°F (5°C) from
the moment the container is opened and throughout its
for this purpose.
NOTE: at the end of the work day (or not more than 24
hours from the time the container is opened),
any remaining milk must be discarded.
Dispensing with the Autosteam selector (2a)
Machines equipped with the AUTO
dispensing system have the "stop steam dispensing when
set temperature is reached" function, and can rapidly heat
and froth milk.
MILK
heated milk.
Choose the type of milk you prefer and press the related key.
dispensing will stop automatically.
2a
Use the appropriate
17a
MILK
2a
A
17a
Cleaning of steam dispensing pipes
At the conclusion of each steam dispensing
phase:
- Using a clean sponge, wash with hot water
removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as
follows:
Turn the nozzle towards the cup tray and
carefully activate steam dispensing at least
once.