13. Delivery of the coffee
press.
10
in place. Position the cup (or cups) under the spout (or
Press the coffee dispensing button (2) and dispense.
When the desired dose is obtained, press button (2) again
to stop dispensing.
14. Steam dispensing
Scalding
hazard!
insulating devices to move the water and steam
wands.
Completely immerse the right or left steam nozzle (6) into
the container with the liquid to be heated and push the
steam control lever (7) upwards.
Wait until the liquid has reached the desired temperature,
then lower the steam command lever (7) to stop the issue
of steam.
1 DISPENSER UNIT MACHINES
Insert the steam jet pipe (6) in a suitable container and
press the steam dispensing push button (7).
pressing the steam dispensing push button (7) again.
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.
10), clean it of the used coffee
10).
Use
the
appropriate
2
10
7
6
1 Dispenser unit machines
10 EN
2
2
10
10
7
6