Defects - Malfunctions; Messages In Explicit Mode - Faema PRESTIGE Utilisation Et Installation

17. Defects - Malfunctions

Direct action by the customer
PROBLEM
16
Loss of water under the machine.
remain in operation.

Messages in explicit mode

MESSAGE POSSIBLE CAUSES: when the message is
visualized
Machine cold This message will appear on the display if any
Please wait dispensing icon is pressed every time the machine pressure, the message automatically disappears.
Service needed This message is displayed when the machine
requires the periodic maintenance intervention. In
order to eliminate temporary the message, keep
pressed
message will reappears in the successive relighting
of the machine with the main switch.
Softener This message is displayed when the softener resins
Change water This message is displayed when the machine
req
In order to eliminate temporary the message, keep
pressed
message will appear again at regular
Machine in This message is displayed when the machine Refer to the Technician's Manual to see how to pro
stand-by
Energy saving This message is displayed when the machine is in
mode
Messages
about washings
CAUSE
No electricity supply.
21
21
Discharge well clogged up.
Water supply or water softener tap
closed.
No water in system.
intervals.
SOLUTION
Check the electricity supply.
Check the position of the main switch
1
Clean.
Use a coarser grind.
Clean.
Clean.
Open the taps
VERIFICATIONS
Contact the authorized technical department. The
carried out.
key pressed for
cancel out the message.
Contact an authorised technician. The message
wi
Note: the need to
The
on.
mode and return to the machine work phase.
Please consult this manual at the "Cleaning op
erations ".
seconds to