Technical Data / Warranty - Migatronic MIG 300 STB Manuel D'instruction

TECHNICAL DATA
Mains voltage
w/transit kit (option)
Fuse 230V/400V
Consumption max.
Efficiency
Cos. phi
Open circuit voltage
Voltage positions
100% duty cycle
60% duty cycle
35% duty cycle
Current range DC
Norm
1
Sphere of application
2
Protection class
Dim. lxwxh (excl. wire feeder)
Total weight (excl. wire feeder)
1
S The machine meets the standards which are demanded of
machines working in areas where there is an increased risk
of electric shock
2
Indicates that the machine cannot be used outside in the rain
3x400 V
3x230 V
16/10 A
10.4 kVA
0.85
0.97
14 - 47 V
20
170 A
215 A
285 A
20 - 300 A
EN/IEC 60974-1
EN/IEC 60974-5
EN/IEC 60974-10 (Class A)
S
IP 21
90x44x71 cm
102 kg
WARRANTY
All MIGATRONIC machines carry a twelve month
guarantee against hidden defects. Such defects must
be notified no later than two months after it has been
noticed. The warranty runs for twelve months after
invoicing to end customer.
The warranty becomes void by faults that can be
attributed to incorrect installation, pests, transport
damages, water- and fire damages, strokes of
lightning, use in connection with a synchronous
generator and use under abnormal conditions, which
lies beyond the product specification.
Lack of maintenance
There is a lapse of warranty if the product is not
properly maintained. E.g. if the product is dirty to such
a degree that cooling is hindered. The warranty does
not cover damages, which can be traced back to
unauthorised and incorrect repairs of the product.
Wear parts
The warranty does not cover wear parts (welding
hoses, welding cables and wire drive rolls)
Resulting damages
Use of the product must stop immediately after
acknowledgement of a defect in order to avoid further
damage of the product. The warranty does not cover
resulting damages due to use of the product after
acknowledgement of a defect. Moreover, the warranty
does not cover resulting damages on other items due
to product defect.
10