Frequently Asked Questions (Faqs) - Marmitek Audio Anywhere 725 Guide Utilisateur

9

Frequently asked questions (FAQs)

I cannot pair my Audio Anywhere 725.
Please check the following:
1. Ensure that the mains adapter is connected and the LED is lit
or flashing.
2. Make sure that the distance between the transmitter and
receiver does not exceed 10 metres and there are no major
obstacles between them.
There is no sound coming from my audio system

Make sure that the audio cable is connected properly (AUX
IN), the correct input is selected on your audio system and
the volume of your audio system is set to the desired level.

Check that the volume on the transmitter or receiver is not
set to low.
I have paired my TV's audio wirelessly with my audio system,
but the sound is not in sync with the video.
For best results, connect the Audio Anywhere 725 transmitter to
your TV's audio output, instead of the audio output of your set-top
box or satellite receiver.
Connecting the transmitter to the headphone output turns off your
TV speakers and allows you to continue using your TV's remote
control to control the volume through the Audio Anywhere 725.
Can I connect my speakers to the receiver directly?
In order to hear sound or music, connect the receiver to an
amplifier with separate (built-in) speakers or so-called active
speakers (with built-in amplifier). You cannot connect passive
speakers directly to the receiver. You can, however, connect
passive headphones to the receiver.
Can I also connect my transmitter/receiver's USB cable to a
USB connector of, for example, my amplifier or TV?
Yes, you can. The transmitter will then automatically switch on
and off, in line with the amplifier or TV. (auto power on)
Audio Anywhere 725 15