Frequently Asked Questions (Faqs) - Marmitek BOOMBOOM 50 Mode D'emploi

7

Frequently asked questions (FAQs)

I am unable to pair my BoomBoom 50.
Please check the following:
1. Ensure that the BoomBoom 50 has been powered on and in
pairing mode state (red / blue LED flashes slowly).
2. Ensure that your headphones are in pairing mode (refer to
your headphones' user manual).
3. Ensure that the distance between your headphones and the
BoomBoom 50 is not too large and there are no major
obstacles between them.
4. To ensure the widest possible range, make sure your
BoomBoom 50 is within line of sight and the internal antenna
is not positioned near large metal objects.
My BoomBoom 50 is paired, but I don't hear anything.
1. Ensure that the blue LED on the Boom Boom 60 lights up
continuously.
2. Ensure that the audio cable is properly connected.
3. Ensure that the BoomBoom 50 is connected to the correct
audio output.
4. Ensure that the volume of your audio source is set to a
comfortable listening level.
5. Ensure that the BoomBoom 50 is paired with the correct
headphones.
My connection often drops out.
If the connection often drops out, then check whether the BB50 is
mounted behind the TV.
It turns out in practice that some TVs may block the Bluetooth
signal.
Extending the USB connection, so the BB50 will just come out
from under the TV is often a good solution.
10 © MARMITEK