Extra Receiver; Frequently Asked Questions - Marmitek SUBWOOFER ANYWHERE 635 Guide Utilisateur

8

Extra receiver

Extra receiver for your Subwoofer Anywhere 635.
With an extra receiver, you can receive the sender's signal at
more places in your house.
9

Frequently asked questions

I can't connect my Subwoofer Anywhere 635.
Check the following:
1. Ensure that the power adapter is connected and the power
LED (5) is on (red).
2. Ensure that the distance between the transmitter and
receiver is not greater than 10 metres and that there are no
large obstacles in the way.
3. Check that the connection LED (4) is on (not blinking). If it is
not on, press the ON/OFF switch (3).
No sound comes out of the Active Subwoofer.
x
Ensure that the audio cable is correctly connected (LFE/LINE
IN), that the correct output has been selected on your audio
installation and that your audio system's volume is set to the
desired level.
x
Check that neither the transmitter nor receiver is muted.
x
Make sure your audio system actually reproduces surround
sound and not, for example, just stereo sound on your front
speakers.
Can I connect my passive subwoofer directly to the receiver?
In order to hear sound or music, connect the receiver to an Active
Subwoofer (with built-in amplifier). You cannot connect a passive
subwoofer directly to the receiver.
My amplifier doesn't have an LFE output
A stereo RCA adapter cable is also supplied, which enables you
to use the PRE OUT L+R output of your amplifier.
Can I connect multiple subwoofers?
8 © MARMITEK