Electromagnetic Compatibility; Electromagnetic Emission - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

Dentsply Sirona
Operating Instructions
Emission measurement
RF emissions according to CISPR 11
RF emissions according to CISPR 11
Harmonics
according to IEC 61000-3-2
Voltage fluctuations / flicker according
to IEC 61000-3-3
67 15 481 D3696
D3696.201.01.03.02 04.2019

Electromagnetic compatibility

3.6
Observance of the following information is necessary to ensure safe
operation regarding EMC aspects.
CEREC Primescan AC / Primescan AC / CEREC Omnicam AC /
Omnicam AC complies with the requirements for electromagnetic
compatibility (EMC) according to EN 60601-1-2: 2015 based on IEC
60601-1-2: 2014.
CEREC Primescan AC / Primescan AC / CEREC Omnicam AC /
Omnicam AC is hereinafter referred to as "UNIT".
3.6.1

Electromagnetic emission

The UNIT is intended for operation in the electromagnetic environment
specified below.
The customer or user of the UNIT should make sure that it is used in
such an environment.
Conformity
Group 1
Class B
Class A
coincides
3.6 Electromagnetic compatibility
Electromagnetic environment - guidelines
The UNIT uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
The UNIT is intended for use in all facilities, in-
cluding residential areas and in any facilities con-
nected directly to a public power supply providing
electricity to buildings used for residential pur-
poses.
3 Product description
31