General Safety Information - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

2 Safety instructions
2.2 Basic safety information
14
2.2.3

General safety information

CAUTION
Risk group 2: Potentially hazardous optical radiation!
Direct radiation to the eye can be harmful to the eye.
➢ During operation, do not look directly at the lamp for long periods.
CAUTION
Risk of toxic liquid escaping from a damaged display
There is a risk of injury if toxic liquid escapes from a damaged
display.
➢ Do not touch the LED screen with sharp or pointed objects.
➢ If the LED monitor is damaged (e.g. the glass screen is broken),
prevent any leaking liquid from coming into contact with your skin,
mucous membranes (eyes, mouth), or foodstuffs and be careful
not to inhale any escaping vapors.
➢ Rinse any parts of your body or items of clothing already
contaminated by the liquid with ample amounts of water and
soap.
CAUTION
Note on the prevention, recognition, and elimination of unintended
electromagnetic effects:
The CEREC Primescan AC / Primescan AC / CEREC Omnicam AC /
Omnicam AC acquisition unit is Class B equipment (classified
according to CISPR 11, EN 60601-1-2: 2015 based on IEC
60601-1-2: 2014).
This unit may be used in professional equipment of health services.
NOTE
Install only approved software
To prevent interference with the runtime reliability of the program,
only software approved by Dentsply Sirona may be installed.
NOTE
Risk of damaging components
Components may be damaged by covering ventilation openings.
➢ Ensure that the ventilation openings are not covered.
WARNING
Danger of touching live parts
If the housing is damaged, there is a possibility of touching live parts
inside the unit.
➢ Check that the unit is intact. The unit can only be used for work
purposes if it is intact.
➢ If the housing is damaged, the unit must be put and left out of
operation until it has been professionally repaired.
Dentsply Sirona
Operating Instructions
67 15 481 D3696
D3696.201.01.03.02 04.2019