Installation And Startup; Transport And Unpacking; Disposal Of Packaging Materials; Scope Of Supply - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

4 Installation and startup

4.1 Transport and unpacking

36
4
Installation and startup
Transport and unpacking
4.1
All products from Dentsply Sirona are carefully checked prior to
shipment. Please perform an incoming inspection immediately after
delivery.
1. Check the delivery note to ensure that the consignment is complete.
2. Check whether the product shows any visible signs of damage.
NOTE
Damage during transport
If the product was damaged during transport, please contact your
carrying agent.
If return shipment is required, please use the original packaging for
shipment.
To prevent damage to the LED monitor, it must be removed during
transport of the unit.
4.2

Disposal of packaging materials

The packaging must be disposed of in compliance with the relevant
national regulations. Please observe the regulations applicable in your
country.

Scope of supply

4.3
The detailed scope of supply is specified in the document "Checklist".
The "Unpacking and Installation Instructions" document is also part of
the scope of supply.
To install the system, for example installation of the monitor, follow the
notes in the "Unpacking and Installation Instructions" document.
Dentsply Sirona
Operating Instructions
67 15 481 D3696
D3696.201.01.03.02 04.2019