Scanner Guide - Dentsply Sirona CEREC Primescan AC Notice D'utilisation

Dentsply Sirona
Operating Instructions
67 15 481 D3696
D3696.201.01.03.02 04.2019

Scanner guide

5.3
The scanner acquires images which are used during the ongoing
measurement in spatial relation to each other (image registration).
During the acquisition and then during the ongoing registration process,
a distinctive sound can be heard.
If the registration cannot be implemented, the acquisition flow is
suspended. You are informed of this by means of a sound. This is
different to the sound emitted during successful acquisition. You can
adjust the volume under configuration and select another type of sound
(melody).
IMPORTANT
Registration error
Should a registration error occur, you must return to another acquired
point.
To start with, practice this procedure on the model and then on
intraoral areas.
➢ Move the scanner to a position where a successful acquisition
was taken. A point that has already been acquired in the occlusal
area is best.
ð You will be able to hear the sound for registered acquisitions.
➢ Continue the acquisition.
Divide the acquisition into four consecutive sequences:
1. Occlusal
2. Buccal
3. Lingual
4. Proximal
5 Operation
5.3 Scanner guide
51