Basic Operations; Adjusting The Audio - Clarion VX409 Mode D'emploi Et Manuel D'installation

Basic Operations

Opening/closing the operation panel
1. Press the [ ] (OPEN/CLOSE) button.
The operation panel will be opened or closed.
Note:
• The operation panel will close automatically when
a disc is inserted. (VX409 only)
• When the operation panel is open, the touch panel
should not be operated. (VX409 only)
Adjusting the angle of the operation
panel
The angle of the operation panel can be adjusted
in the range of 0 to 30 .
1. Keep pressing the [
more than 2 seconds.
A beep will sound and the operation panel
will start moving.
PWR
MUTE
VOL
2. When the operation panel is moved to your 2. When the operation panel is moved to your
desired angle, release the button. desired angle, release the button.
The operation panel will stop. The operation panel will stop.
3. For the VZ409, simply adjust your
desired angle by pressing the [
buttons on your control panel.
18
VX409/VZ409
] (OPEN/CLOSE) button
ENT
MAP
SOURCE
] or [ ] tilt
Returning the operation panel to the
original angle (VX409)
1. Press the [ ] (OPEN/CLOSE) button
to open the motorized LCD panel.
2. Keep pressing the [ ] (OPEN/CLOSE) button
until the panel is back at the normal position.

Adjusting the AUDIO

1. Press the [EQ] button on the screen or
the [SEL] button on the remote control.
2. Touch the item key to adjust.
3. Perform the adjustment.
See the following sections for detail.
4. Touch the [Back] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Adjusting the balance/fader
1. Touch the BALANCE or FADER in the
audio menu.
2. Touch the [F ] or [ R] key to adjust to the
fader level.
• The factory default setting is "0".
(Adjustment range: front 9 to rear -9)
3. Touch the [L] or [R] key to adjust to the
balance level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9)
Adjusting the BASS
The bass gain and bass frequency can be
adjusted as follows.
1. Enter the Audio settings menu.
2. Touch the [-] or [+] key to set the desirable
level.
GAIN:
–7 to 7 (The factory default setting is "0")
3. To set the bass center frequency, enter
the ASP adjustment in the SETTING menu.
Adjusting the TREBLE
The treble gain and treble frequency can be
adjusted as follows.
1. Enter the Audio settings menu.
2. Touch the [-] or [+] key to set the desirable
level.
GAIN:
–7 to 7 (The factory default setting is "0".)
3. To set the treble center frequency, enter
the ASP adjustment in the SETTING menu.