Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRESET menu -
IMPORTANT! To avoid damage to the vehicle electronics, the refresh charging mode can-
settining pre-
not be saved.
ferred operating
modes
1
2
3
IMPORTANT! Regardless of the „preferred setting" saved, another mode can be selected
at any time. After disconnecting the charging terminals or mains supply, the device auto-
matically reverts to the saved „preferred setting".
CHARGING CA-
1
BLE menu - set-
ting charging
cable data
2
Select one of the following operating modes using the „up" and „down" buttons
Save the desired mode by pressing the start/stop button
The length of the charger cable is displayed.
If necessary, change measure (metric/imperial) by pressing the info button
Preferred Setting Used Mode (factory setting)
After disconnecting the charging terminals or mains sup-
ply, the last mode selected is saved.
Preferred Setting: charge acceptance test mode
After disconnecting the charging terminals or mains sup-
ply, the charge acceptance test mode is saved.
Preferred Setting: standard charging mode
After disconnecting the charging terminals or mains sup-
ply, the standard charging mode is saved.
Preferred Setting: user charging mode
After disconnecting the charging terminals or mains sup-
ply, the user charging mode is saved.
Preferred Setting: external power supply mode
After disconnecting the charging terminals or mains sup-
ply, the external power supply mode is saved.
71
Publicité
Table des Matières
