Fronius Acctiva Professional Flash Instructions De Service page 70

Accessing setup
menu
IMPORTANT! If no selection is made within 30 seconds, the setup menu is exited auto-
matically.
Setting param-
etes in the USER
U/I menu
68
To access menu: press info button for approx. 5 secs
1
Select menu item using the „up" and „down" buttons
2
Enter the selected menu item by pressing the start/stop button
3
1
The screen to enter the access code is displayed:
Enter access code 3831:
Using the „up" and „down" buttons, enter the correct digit in the underlined position
2
Press the info button to go to the next position
3
Repeat steps 2 and 3 until all four digits have been entered correctly
4
Press the start/stop button to confirm the access code is correct
5
The first parameter in the USER U/I menu is displayed.
Setting parameter - general:
Select the desired parameter using the „up" and „down" buttons
6