Abicor Binzel iCAT Mode D'emploi page 71

iCAT
12 Disposal
When disposing of the system, the local regulations, laws, provisions, standards and guidelines
must be observed. To correctly dispose of the product, it must first be disassembled.
 11 Dismounting on page EN-34
12.1 Materials
This product is mainly made of metallic materials which can be melted in steel and iron works
and are thus almost infinitely recyclable. The plastic materials used are marked in preparation
for sorting and separation of the materials for later recycling.
12.2 Consumables
Oils, greases and cleaning agents must not contaminate the ground or enter sewage systems.
These materials must be stored, transported and disposed of in suitable containers. Observe the
relevant local regulations and disposal instructions of the safety data sheets specified by the
manufacturer of the consumables. Contaminated cleaning tools (brushes, rags, etc.) must also
be disposed of in accordance with the information provided by the manufacturer of the
consumables.
12.3 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. Packaging
materials are always selected with regard to their possible recycling ability.
BAL.0139 • 2018-06-21
12 Disposal
EN - 35