End of life disposal
• Equipment that has electrical and electronic components should be disassembled and
recycled per Waste of Electrical and Electronic Equipment (WEEE) or in accordance
with local or national regulation.
• All batteries in the product must be recycled separately. Batteries are to be disposed
in accordance with national or local regulations.
• Components that are primarily made up of different kinds of metal (containing more
than 90% metal by weight) for example bed frame, should be recycled as metals.
Transport and storage
Handle with care. Do not drop. Avoid shock or violent impact.
This equipment should be stored in a clean, dry and well-ventilated area which meets the
following conditions:
Temperature
Relative humidity
Atmospheric pressure
CAUTION
If the bed is stored for a long time, it should be connected to the electricity supply for
24 hours every three months to recharge the backup battery, otherwise it may
become unserviceable.
Symbols
58
-10°C to 50°C (14°F to 122°F)
20% to 90% at 30°C, non-condensing
700hPa to 1060hPa
Safe working load
Maximum patient weight
Alternating current (a.c.)
Caution
Refer to instructions for use
Type B applied part
Applied parts are considered to be: Upper
frame section, Bed controls, Split side rails,
Head and Foot Boards