Advanced Features; Patient Weighing System - arjo Enterprise 9000X Notice D'utilisation

5. Advanced Features

Patient weighing system

The controls for the weighing system are located on the foot end split side
rails.
Display: indicates the patient's weight in kilograms. It can also be used to
show other information, e.g. bed section angles.
Weigh: this button is used to calculate and display the current patient
weight.
Auto Compensation (tare): this button allows items to be added to or
removed from the bed without affecting the indicated patient weight.
Zero: this button is used to reset the weighing system when the bed is first
set up and before a new patient uses the bed.
Select Weight Display: this button allows the patient weight to be displayed
rounded to the nearest 100g or 500g.
WARNING
The weighing system should only be used by staff trained in the correct use of the
weighing function.
The weighing system should only be used in closely supervised environments, where
factors influencing patient weight (such as additions to the bed) can be controlled as
described in the following instructions for use.
Fig. 21 - Patient weighing system controls
39