INSTALLATION
Installation
10. Installation
Standard installation
- Electrical connection from below on unfinished walls
- Water connection on unfinished walls
- Medium connected load is selected
Other installation options
See chapter "Installation options"
10.1 Standard installation
Opening the appliance
f Open the appliance by holding the fascia at the side and pull-
f
ing forwards away from the appliance cover. Undo the screw.
Pivot open the appliance cover.
www.stiebel-eltron.com
f Remove the back panel by pressing the two locking tabs and
f
pulling the lower section of the back panel forwards.
Preparing the power cable
160
30
1 Cable entry installation aid
f Prepare the power cable.
f
DHE Connect | DHE Touch |
1
83