ETNA KI160ZT Mode D'emploi page 38

OPERATION
4. Within 10 seconds select a cooking time with the plus (+) and minus (-) keys.
5. The timer has been set.
▷ The timer indication light blink.
The cooking zone will switch off after the set time has passed.
▷
The timer alarm beeps after the set time has passed.
▷
▷ Touch the timer key to stop the alarm.
Changing preset cooking time
Cooking time can be changed anytime during the operation.
1. Touch the timer key as many times as necessary, to select the active cooking zone for which
you want to change the timer (see Timer display description table).
2. Touch within 10 seconds the plus (+) and minus (-) keys to change the time.
▷ If time is not modified in 10 seconds since touching the keys, the timer is keeping the
countdown before the adjusting operation.
Checking remaining cooking time
• The timer displays shows the remaining time from the cooking zone for which the point
adjacent to the timer display is flashing. When more than one cooking timers are set, the
shortest time set will be visible in the display.
1. Touch the timer key as many times as necessary, to select the active cooking zone for which
you want to check the remaining time.
The timer will display the remaining time of the selected cooking zone.
▷
Turning the timer off
If you want to switch off the timer prior the end of preset time:
1. Touch the timer keys as many times as necessary, to select the zone of which you want to
disable the timer.
2. Touch the minus (-) key to the value "0".
▷ The indicator assigned to the cooking zone goes out.
EN 16