Installation; Rigging The 8Xt Or 108P Enclosure With The Etr8-2; Assembling - L-Acoustics 115XT HiQ Manuel Utilisateur
Retour de scène coaxial
Masquer les pouces
Voir aussi pour 115XT HiQ:
- Manuel d'utilisation (42 pages) ,
- Manuel utilisateur (72 pages) ,
- Mode d'emploi (61 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
XT
COAXIAL RANGE -
Rigging Procedures
VERSION 1
6
INSTALLATION
6.1
Rigging the 8XT or 108P enclosure with the ETR8-2
6.1.1
Assembling
The ETR8-2 U-bracket is secured to the 8XT or 108P enclosure in the following way:
1.
Remove the recessed set screw located on the top face of the enclosure.
Note: Put the screw in a safe place.
2. Remove the locking pin from the U-bracket and open the pivoting arm.
XTP_RM_ML_1
P
SELF-POWERED COAXIAL RANGE
Recessed set
screw
Figure 7: Recessed set screw
Figure 8: Opening the pivoting arm
w w w . l - a c o u s t i c s . c o m
12 en
Publicité
Chapitres
Table des Matières
