Xt And P Coaxial Ranges - L-Acoustics 115XT HiQ Manuel Utilisateur

XT
COAXIAL RANGE -
Rigging Procedures
VERSION 1
4

XT AND P COAXIAL RANGES

4.1 XT Coaxial Range
The L-ACOUSTICS ® ETR8-2, ETR12, and ETR15 mounting accessories are the dedicated U-brackets for wall or
ceiling-mounting the 8XT, 12XT, and 115XT HiQ enclosures, respectively.
®
The L-ACOUSTICS XTLIFTBAR rigging accessory is dedicated for flying the 12XT and 115XT HiQ enclosures.
The system solution developed by L-ACOUSTICS for the XT range consists of the elements needed to fully take
advantage of the possible configurations and optimize the system. The main components of the system are:
8XT
12XT
115XT HiQ
ETR8-2
ETR12
ETR15
XTLIFTBAR
LA4
LA NETWORK MANAGER
SOUNDVISION
8XT
12XT
115XT HIQ
Each system configuration should be first modeled using the L-ACOUSTICS
to verify that safe system setup safety limits apply. A detailed description on the use of the SOUNDVISION application
software is beyond the scope of this manual. Please refer to the appropriate documentation, also available on the L-
ACOUSTICS internet website @ www.l-acoustics.com.
XTP_RM_ML_1
P
SELF-POWERED COAXIAL RANGE
Passive compact coaxial enclosure
Active/passive multipurpose coaxial enclosure
Active coaxial stage monitor
Mounting accessory for the 8XT enclosure
Mounting accessory for the 12XT enclosure
Mounting accessory for the 115XT HiQ enclosure
Rigging accessory for the 12XT and 115XT HiQ enclosures
Dedicated amplified controller
Remote control software for the amplified controllers
Acoustical and mechanical modeling software
ETR8-2
ETR12
XTLIFTBAR
ETR15
Figure 1: XT range components
w w w . l - a c o u s t i c s . c o m
SOUNDVISION
LA NETWORK MANAGER
LA4
® SOUNDVISION application software
6 en