Installation; Stacking Or Flying The 115Xt Hiq; Connecting Speakers - L-Acoustics 115XTHiQ Manuel D'utilisation

115XT HiQ 115XT HiQ
115XT HiQ 115XT HiQ
COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR
user manual user manual
user manual user manual
VERSION 1.4
6 6 6 6

INSTALLATION

INSTALLATION INSTALLATION INSTALLATION
6.1

Stacking or flying the 115XT HiQ

The integrated rigging components and the wedge-shaped cabinet design of the 115XT HiQ enclosure (Figure 3) allow
various setups such as:
• • • •
Wall or ceiling-mounting using the L-ACOUSTICS
• • • •
Flying using the L-ACOUSTICS
• • • •
Mounting to a 35 mm/1.4 inch pole stand using the integrated pole socket.
• • • •
Stacking with two fixed angle settings of 30° and 60° with regard to the vertical.
* A safety eye-bolt accessory can be added using the M8 insert located on the rear face of the 115XT HiQ enclosure.
Note: The "M8" notation refers to the European standard (see applicable external documentation).
!
Refer to the "XT and P'' rigging procedures manual to get acquainted with the XT range
specific procedures.
WARNING
6.2

Connecting speakers

The 115XT HiQ enclosure is driven and powered by the dedicated L-ACOUSTICS
controllers.
Each of the LA8 amp channels 1 and 3 can drive one or two (in parallel) 115XT HiQ enclosures.
Each of the LA4X amp channels 1 and 3 can drive one 115XT HiQ enclosures.
For more details please refer to the "LA4X'' or "LA8'' user manual also available on the L-ACOUSTICS
at www.l-acoustics.com.
The 115XT HiQ enclosure is equipped with two 4-point Speakon
with a second 115XT HiQ enclosure in parallel using one of the L-ACOUSTICS
It is recommended to use the L-ACOUSTICS
amplified controller. This cable must be extended by one of the L-ACOUSTICS
Figure 2 and Figure 4).
It is recommended to use the L-ACOUSTICS
the LA4 / LA4X amplified controller.
®
The L-ACOUSTICS wiring convention is as follows:
®
Speakon connector labels
DO.7,
DO10,
or DO25
Figure 4: Connecting two 115XT HiQ in parallel to the channel pair 1/2 of an LA8 controller
HiQ_UM_ML_1-4
®
XTLIFTBAR rigging accessory.*
®
DOFILL-LA8 cable to connect the 115XT HiQ enclosure to the LA8
®
SP.7, SP10, or SP25 cables to connect the 115XT HiQ enclosure to
1+
1-
2+
2-
CH(B)
DOFILL-LA8
CH(A)
w w w . l - a c o u s t i c s . c o m
®
ETR15 mounting accessory.*
®
connectors wired in parallel, allowing connection
®
SP.7, SP10, or SP25 cables.
®
DO.7, DO10, or DO25 cables (see
Connection to transducers
LF +
LF -
HF +
HF -
®
LA8 or LA4X amplified
®
web site
SP.7,
SP10,
or SP25
10 en 10
10 10