Care And Maintenance - L-Acoustics 115XT HiQ Manuel Utilisateur

7

CARE AND MAINTENANCE

The components for assembling the XT and P range enclosures are as follows:
•
Mounting accessories ETR8-2, ETR12, ETR15, and ETR15P
•
Rigging accessory XTLIFTBAR
If components are used in the manner as described in this manual, they will remain fully operational over the life of the
enclosure. In order to guaranty their durability it is necessary to regularly check the following points:
!
The ETR8-2, ETR12, ETR15, ETR15P, and XTLIFTBAR accessories as well as the shackles and pins
should not show any deformation, indentation, or rust.
WARNING
!
The sockets on the enclosures should not show any signs of deformation, indentation, or rust.
They must be securely fixed to the enclosure.
Any enclosure incorporating a part showing signs of defect must be immediately put aside and
withdrawn for use to be inspected by qualified service personnel.
WARNING
!
Ensure that each pin on the ETR8-2, ETR12, ETR15, ETR15P, and XTLIFTBAR mounting accessories
operate correctly by moving its mechanism and checking that nothing prevents its movement.
WARNING
XTP_RM_ML_1 w w w . l - a c o u s t i c s . c o m
EN
21 en