Installation; Flying Or Stacking The 12Xti; Connecting Speakers - L-Acoustics XTi Série Manuel D'utilisation

6 6 6 6

INSTALLATION

INSTALLATION
INSTALLATION INSTALLATION
6.1

Flying or stacking the 12XTi

The inserts and the wedge-shaped cabinet design of the 12XTi enclosure (Figure 2) allow various setups such as:
• • • •
Wall or ceiling-mounting using the L-ACOUSTICS
• • • •
Wall or ceiling-mounting using the OMNIMOUNT
• • • •
Pole mounting using the L-ACOUSTICS
• • • •
Stacking with two fixed angle settings of 30° and 60° with regard to the vertical.
!
Refer to the "XTi'' rigging procedures manual before installing an enclosure.
WARNING
6.2

Connecting speakers

The 12XTi enclosure is driven and powered by the dedicated L-ACOUSTICS
Each LA4 / LA4X amp channel can drive one 12XTi enclosure. For more details, please, refer to the "LA4 / LA4X''
user manual also available on the L-ACOUSTICS
The 12XTi enclosure is equipped with 4-point Speakon
amplified controller using one of the L-ACOUSTICS
!
A maximum of one 12XTi enclosure can be connected per LA4 / LA4X output channel.
CAUTION
®
The L-ACOUSTICS wiring convention is as follows:
®
Speakon connector labels
12XTI_UM_ML_1-1
®
EMBi 35 mm/1.4 inch socket.
®
web site at www.l-acoustics.com.
®
SP.7, SP10, or SP25 cables (see Figure 1 and Figure 3).
1+
1-
2+
2-
w w w . l - a c o u s t i c s . c o m
®
ETR12XTi mounting accessory.
®
120.0 SERIES mounting accessories.
®
LA4 / LA4X amplified controller.
®
connectors allowing connection with the LA4 / LA4X
Connection to transducers
IN +
Not used
Not used
IN -
EN
9 9 9 9 en