Xt Coaxial Range; Pself-Powered Coaxial Range; Etr8-2, Etr12, Etr15, Etr15P, And Xtliftbar Accessories; Etr8-2 Mounting Accessory - L-Acoustics 115XT HiQ Manuel Utilisateur

XT
COAXIAL RANGE -
Rigging Procedures
VERSION 1
5

ETR8-2, ETR12, ETR15, ETR15P, AND XTLIFTBAR ACCESSORIES

5.1

ETR8-2 mounting accessory

The L-ACOUSTICS ® ETR8-2 U-bracket (Figure 3) is adapted for attaching an L-ACOUSTICS
enclosure. It can be either fastened to a wall or suspended from a structure or ceiling (typically for under-balcony
applications).
It is possible to secure the ETR8-2 to a structure using two 8mm/0.31in screws and one 10mm/0.39in screw (not
provided).
!
It is the sole responsibility of the user to verify that the ETR8-2 is correctly secured to the structure.
L-ACOUSTICS recommends securing to a concrete ceiling using expansion anchors designed to
support at least 5 times the total load of the system (the weight of the product is indicated on the
identification label of each product).
The ETR8-2 can support one 8XT or 108P at the maximum.
WARNING
XTP_RM_ML_1
P
SELF-POWERED COAXIAL RANGE
Main bar
Fixed arm
Locking pin
Pivoting arm
Knob
Figure 3: ETR8-2 mounting accessory
w w w . l - a c o u s t i c s . c o m
Stud
® 8XT or 108P
8 en