Etr15P Mounting Accessory - L-Acoustics 115XT HiQ Manuel Utilisateur

XT
COAXIAL RANGE -
Rigging Procedures
VERSION 1
5.3

ETR15P mounting accessory

The L-ACOUSTICS ® ETR15P U-bracket (Figure 5) is adapted for attaching an L-ACOUSTICS
can be either fastened to a wall or suspended from a structure or ceiling (typically for under-balcony applications).
It is possible to secure the ETR15P to a structure using three 10mm/0.39in screws (not provided).
!
It is the sole responsibility of the user to verify that the ETR15P is correctly secured to the structure.
L-ACOUSTICS recommends securing to a concrete ceiling using expansion anchors designed to
support at least 5 times the total load of the system (the weight of the product is indicated on the
identification label of each product).
The ETR15P can support one SB15P at the maximum.
WARNING
XTP_RM_ML_1
P
SELF-POWERED COAXIAL RANGE
Main bar
Spring-loaded pin
Pivoting arm
Fixed arm
Stud
Knob
Figure 5: The ETR15P mounting accessory
w w w . l - a c o u s t i c s . c o m
® SB15P enclosure. It
10 en