Hiq_Fr_100], [Hiq_Fi_100], And [Hiq_Mo_100] Presets - L-Acoustics 115XT HiQ Manuel Utilisateur

115XT HiQ
COAXIAL STAGE MONITOR
User Manual
VERSION 1
7.3.2

[HIQ_FR_100], [HIQ_FI_100], and [HIQ_MO_100] presets

The [HIQ_FR_100] preset features a high frequency shelving equalization and includes a 100 Hz high-pass filter.
The [HIQ_FI_100] preset results in a nominally flat frequency response contour and includes a 100 Hz high-pass filter.
The [HIQ_MO_100] preset features specific equalization to account for half-space loading conditions (floor monitoring
applications, and wall or ceiling-mounted enclosures) and includes a 100 Hz high-pass filter.
From the LA4 amplified controller front panel, activate the LOAD PRESET menu and then select the desired preset.
Refer to the ''LA4'' user manual for additional instructions. The presets are also accessible using the LA NETWORK
MANAGER software (refer to the ''LA NETWORK MANAGER'' user manual). Accessible controls in the ''HIGH
PASS'' mode presets are shown in the following chart:
Table 3: Accessible controls in the ''HIGH PASS'' mode presets
LA4 Inputs/Outputs Elements to connect
IN A
IN B
OUT 1 115XT HiQ enclosure
OUT 2
115XT HiQ enclosure
OUT 3
OUT 4
* IN: input signal, A: channel A, B: channel B, LF: LF transducer, HF: HF transducer
HiQ_UM_ML_1
Preset
assignments*
Input signal A IN_A
Input signal B IN_B
LF_A
HF_A
LF_B
HF_B
w w w . l - a c o u s t i c s . c o m
Accessible (O) and blocked (X) controls
Mute Gain Delay
X O O
X O O
O X X
O X X
O X X
O X X
Polarity
O
O
X
X
X
X
14 en