Extending The Telephone System; Multiple Handsets - switel DFT 827 Série Mode D'emploi

y / z, Select
/ Cancel
OK
11

Extending the Telephone System

The internationally approved GAP
base stations from different manufacturers. As a result, it is possible to integrate SWITEL
devices and devices from other manufacturers together in one telephone system. It is possi-
ble, however, that some functions are not available.

Multiple handsets

Up to 6 handsets can be registered on the base station.
Registering handsets
Before starting to register a handset, switch the base station to Registration mode.
Press and hold ‘
Now register the handset, . Page 112.
The currently valid PIN is used for registration purposes, . Page 112.
The handset is automatically assigned an internal call number following registration. The in-
ternal call number appears in the display.
Deregistering handsets
Handsets are deregistered via the menu. Refer to Page 112 for the sequence of menu op-
tion selections.
Multiple base stations
You can increase the range of your handset by registering it on several base stations. The
handset can be registered on up to 4 different base
stations simultaneously. Each base station requires its own telephone line socket. Connec-
tions can be used with the same call number or with different ones.
Refer to Select Base, . Page 111.
1
GAP: Generic Access Profile = Standard for the interoperation of handsets and base
stations from different manufacturers.
1
standard regulates the compatibility of handsets and
To register handsets from other manufacturers, please refer to the operating
manual supplied with them.
A handset can only be deregistered from a base station by using another hand-
set registered to the same base station.
Calls in progress cannot be transferred from one base station to another.
Extending the Telephone System
Select the handset and confirm
Confirm or cancel the action on the receiving
handset
Activate Registration mode
115