Permobil M400 Corpus HD Manuel D'utilisation page 99

M400 Corpus HD
3.5.3.2 Charger Socket
ATTENTION!
The wheelchair's warranty will be voided if any device other than a battery
charger supplied with the wheelchair, or the lock key is connected into the
control panels charger socket.
This socket should only be used for charging or locking the
wheelchair. Do not connect any type of programming cable into this
socket This socket should not be used as a power supply for any
other electrical device. Connection of other electrical devices may
damage the control system or affect the E.M.C. performance of the
wheelchair.
3.5.3.3 Touches de fonction
On the control panel there are a total of 10 Function Buttons.
Apprendre à connaitre votre fauteuil roulant
Illustration 76. Charger Socket
99