Permobil M400 Corpus HD Manuel D'utilisation page 114

M400 Corpus HD
Storing Memory
Before storing a seating position in memory, position the seating
system in the position that is desired to be stored.
1. Enter the memory mode by pressing and holding the memory
button (8) for two seconds. While in the memory mode, the
LED flashes green.
2. Press and hold button (4) until the LED immediately to the left
of the Memory LED lights green. You have now "enabled"
storing and are ready to store a memory seat position.
3. Press and hold the desired "store" button (5, 6 or 7) for three
seconds to memorize the current seat position in a memory
location. The LED above the memory position will light red and
the control panel will emit a tone when the memory has been
successfully stored.
4. Return to standard seat function operating mode by pressing the
memory button (8).
114
Apprendre à connaitre votre fauteuil roulant
Illustration 99. Memory Function