Permobil M400 Corpus HD Manuel D'utilisation page 88

M400 Corpus HD
Motor Temperature
This symbol means that a safety feature has been triggered. This
safety feature reduces the power to the motors, and automatically
resets after a certain period of time. When the system is reset, the
symbol disappears. When this symbol occurs, drive slowly or stop
the wheelchair. Permobil recommends that you drive slowly for a
short period after the symbol has disappeared, to prevent unnecessary
strain on the wheelchair. If the symbol occurs multiple times and the
wheelchair is not driven in any of the conditions mentioned in
4.2.4 Restrictions de conduite , Page 144, there might be something
wrong with the wheelchair. Contact your service technician.
Timer
This symbol is displayed when the control system is changing
between different states. An example would be entering into
Programming Mode. The symbol is animated to show the sands
falling.
E-Stop
If the control system is programmed for latched drive or actuator
operation, then it is normal for an Emergency Stop Switch to be
connected into the External Profile Switch Jack. If the Emergency
Stop Switch is operated or disconnected, this symbol will flash.
88
Apprendre à connaitre votre fauteuil roulant
Illustration 63. Motor Temperature
Illustration 64. Timer
Illustration 65. E-Stop