M400 Corpus HD
1. Switch off the main power switch on the control panel
2. Surélevez le fauteuil roulant de telle façon que la roue tourne
librement et laissez l'air s'échapper.
3. Remove the wheel, it´s fitted with four screws.
4. Release the air.
5. remove the six screws holding the rim together.
6. Démontez la jante.
7. Replace the inner tube (2) in the tire (3) and fit together with
the two rim halves (1&4). Tighten the six screws using a
dynamometric wrench. Tightening torque: .
8. Fill the tire to recommended tire pressure, 200 kpa (2 bar).
9. Fit the wheel on to the wheelchair. Tighten the four screws
using a dynamometric wrench. Tightening torque: .
188
Entretien et réparations
Illustration 143. Changing inner tube