Permobil M400 Corpus HD Manuel D'utilisation page 87

M400 Corpus HD
In Focus
When the control system contains more then one method of direct
control, such as a secondary Joystick Module or a Dual Attendant
Module, then the Module that has control of the wheelchair will
display the In Focus symbol.
Speed Limit
If the speed of the wheelchair is being limited; for example, by a
raised seat, then this symbol will be displayed. If the wheelchair is
being inhiited from driving, then the symbol will flash.
Redémarrage
When the control system requires a restart; for example, after a
module re-configuration, this symbol will be flashed.
Control System Temperature
This symbol means that a safety feature has been triggered. This
safety feature reduces the power to the motors, and automatically
resets when the control system has cooled down. When this symbol
occurs, drive slowly or stop the wheelchair. If the control system
temperature continues to increase it can reach a level where the
control system must cool down, at which point it will not be
possible to drive any further.
Apprendre à connaitre votre fauteuil roulant
Illustration 59. In Focus
Illustration 60. Speed Limit
Illustration 61. Redémarrage
Illustration 62. Control System Temperature.
87