Application
- Drawing number
- Neck diameter
- Interference it
4. Installation
The EAZ coil is meant to work only with SKF EAZ
control cabinet and vice versa. This is the only way
we can ensure the right performance of the tool.
The power supply needs to be 3 phases+ neutral +
ground. We will only use 2 phases out of the 3 of
them and the ground. We won't use the neutral.
The cable to connect the mains and the control
cabinet is not delivered with the product. It is for the
user to arrange the right cable. A qualiied electrician
should install this.
I M P O R TA N T:
The EAZ Control Cabinet and EAZ coil might create
some disturbance in other electrical equipment
connected to the same power supply line. To avoid
this, the EAZ Control Cabinet and EAZ coil need to
be connected to a dedicated power line.
:
:
:
EN
7