General; Design Principle Of Repeatone - StarLab RepeatOne Mode D'emploi

1. General

RepeatOne ® is a hand-held device for repetitive dispensing.
Up to 48 dispenses of the same sample can be made from
a single filling, resulting in a considerable reduction in
time and expense.
RepeatOne allows the selection of five separate volumes
®
from each TipOne Repeat Dispenser Tip. Seven different
®
TipOne ® Repeat Dispenser Tip sizes provide the most
important volumes from 10 to 5000 µl.
Use only original STARLAB TipOne Repeat Dispenser Tips
®
to guarantee the pipette's performance.
1
2
3
4
5
Fig.1
4

1.1. Design Principle of RepeatOne

Volume selection dial
1
To determine the dispensing volume, the dial setting
(1– 5) is multiplied by the minimum pipetting volume of
the TipOne Repeat Dispenser Tip.
®
Dispensing lever
2
The volume is dispensed by pressing the dispensing
lever down until it stops.
Filling lever
3
The TipOne Repeat Dispenser Tip is filled by sliding this
®
lever upward.
Locking clamp
4
The locking clamp secures the TipOne
Dispenser Tip firmly into RepeatOne
TipOne Repeat Dispenser Tip
5 ®
®
(Fig.1)
® Repeat
.
®