Operation; Inserting A Tipone ® Repeat Dispenser Tip; Filling The Tipone Repeat Dispenser Tip - StarLab RepeatOne Mode D'emploi

3. Operation

3.1. Inserting a TipOne
®
Repeat Dispenser Tip
– Slide the filling lever
1
1
down until it stops.
2
– Raise the locking clamp
upward.
2
– Insert the TipOne Repeat
®
Dispenser Tip until it
clicks into position.
Ensure the TipOne ®
Repeat's plunger is fully
inserted into the barrel
before attaching it to the
RepeatOne (Fig. 4).
®
Fig. 4
– Ensure the filling lever is
completely down, then
lower the locking clamp
to secure the TipOne
Repeat Dispenser Tip in
place (Fig. 5).
3.2. Filling the TipOne
Repeat Dispenser Tip
The 0.5 ml, 1.25 ml and
2.5 ml TipOne
Dispenser Tip can be used
with a standard 200 µl tip.
Attaching a tip facilitates
filling from narrow-necked
vessels, piercing sealing foil
Fig. 5
7
and makes dispensing of
small volumes more
precise.
®
– Immerse the tip into the
liquid.
– Fill by slowly sliding the
filling lever upward
®
(Fig. 6).
– Discard the first
dispensing step.
Repeat
®
RepeatOne ® is now ready
for operation.
Fig. 6