Specifications; Environmental Conditions; General Information; Delivery - StarLab N2631-0017 Mini Fuge Plus Mode D'emploi

1

Specifications

Dimensions
Weight
Electrical
Unit Input
Maximum Speed/RCF 6000 rpm / 2000 xg

1.1 Environmental Conditions

› Indoor use only
› Altitude up to 2000 m
› Operating temperature 5 °C to 40 °C
› Maximum relative humidity 80 % for temperature up to 30 °C, decreasing linearly to 50 %
relative humidity at 40 °C
› Pollution degree 2
2

General Information

The STARLAB Mini Fuge Plus is supplied with two rotors, one for micro tubes and one for
0.2 ml PCR strip tubes. The 8 place rotor is designed to centrifuge up to eight individual
1.5/2.0 ml plastic micro centrifuge tubes. It will also accept 0.5/0.6 ml, 0.4/0.25 ml and 0.2 ml
tubes with the adapters supplied with the unit. The strip tube rotor is designed to centrifuge
four 8 x 0.2 ml strip tubes. It will also accept up to 32 individual 0.2 ml tubes. Both rotors are
designed for applications requiring relatively low g-forces, such as microfiltration, cell separation
and quick spin downs from the walls of tubes.
Please read this manual thoroughly before attempting to operate the centrifuge.

2.1 Delivery

› 8 place tube rotor
› 4 place PCR strip rotor
› Eight adapters for 0.5 ml tubes
› Eight adapters for 0.2 ml tubes
› Eight adapters for 0.25 ml tubes
› Power Adapter, 24 V
4
· Mini Fuge Plus · Manual
5.9 x 5.9 x 4.6 in / 150 x 150 x 116 mm
2.65 lbs / 1.2 kg
AC 100 -- 240 V, 50/60 Hz, 0.35 A
24 VDC 1A