2
1. Thrust rod
2. UP (Higher)
3. DOWN (Lower)
Trim angle adjustment (Manual tilt
type)
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral.
3. Raise the outboard motor to the tilt up
position.
ENOF00053-0
1
3
ENOF00229-0
ENGINE OPERATION
4. Change the thrust rod position as fol-
lowing picture.
1. Push
2. Pull
5. Reinstall the thurst rod securely.
6. Gentry lower the outboard.
ENOM00060-A
8. Tilt up and down
ENOW00055-0
WARNING
Do not tilt up or down outboard motor
when swimmer(s) or passenger is near to
prevent them from being caught between
outboard motor body and clamp bracket in
case the outboard motor body falls.
ENOW00048-0
WARNING
When tilting up or down, be careful not to
p l a c e y o u r h a n d b e t w e e n t h e s w i v e l
bracket and the stern bracket.
Be sure to tilt the outboard motor down
slowly.
ENOW00056-A
WARNING
When tilting up outboard motor with fuel
joint for over a few minutes, be sure to dis-
33
2
1
ENOF01612-0
7