Oil Level Checking - TOHATSU MFS2.5B Manuel De L'utilisateur

Masquer les pouces Voir aussi pour MFS2.5B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENOM00229-A

Oil level checking

1. Stop the engine and set it in a vertical
position.
2. Remove the top cowl.
3. Check the oil level by the oil level
gauge.
1
1. Oil filler cap
2. Oil level gauge
3. Upper level
4. Lower level
ENON00024-0
Note
The oil level should be checked when the
engine is cold.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears contam-
inated.
ENOM00082-B
Engine oil replenishing
ENOW00079-A
CAUTION
Do not add engine oil of brand and grade
other than existing one. In case engine
oil of other brand or grade is added,
drain all oil and ask dealer for treatment.
In case other than engine oil such as
gasoline is put in the oil chamber, empty
the chamber and ask dealer for treat-
ment.
When replenishing engine oil, be careful
not to allow entry of foreign matters
such as dust and water into oil chamber.
Wipe off engine oil well immediately if
spilled and dispose of it in accordance
with local fire prevention and environ-
ment protection regulations.
Do not replenish engine oil over upper
2
limit. If overfilled, remove oil to upper
limit. If engine oil is over the upper limit,
300 mL
it can leak potentially leading to engine
3
damage.
If the oil level is low, or at lowest mark, add
recommended oil to the upper mark.
250 mL
4
ENOF00239-0
ENOM00083-0
Washing outboard motor
ENOW00081-0
Do not start engine without removing pro-
peller, or accidentally turning propeller
could cause personal injury.
ENOW00082-0
Never start or operate the engine indoors
or in any space which is not well ventilated.
Exhaust gas contains carbon monoxide, a
INSPECTION AND MAINTENANCE
WARNING
WARNING
41
ENOF00240 0
10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mfs3.5b

Table des Matières